The Benefits of Geothermal Systems in Winter
Heat
pumps are the most common ways to get warmth for homes – but they do
come with a caution. As a heat pump should draw off heat from the
outdoor air to provide heat to the indoors, the deep cold temperature
will cut into the energy efficiency of the heat pump.
However,
this is where geothermal systems can help you. Usually, geothermal heat
pumps or the ground source heat pumps are one of the most reliable
heating systems to be utilized year round. Regardless of the frigid
temperature in the outdoor, they can offer a level of savings that can
surpass the standard heat pumps and furnaces both electric and gas.
Though
geothermal heat pumps make up a very certain niche in the HVAC
industry, there are still a plenty of choices to choose from. Therefore,
you should make a decision according to your property.
There are three major types of geothermal systems that are discussed below:
1. Closed Loop Systems –
Closed
loop systems use a length of tubing like plastic that is circulated
with coiled and antifreeze deep underground. A special device known as a
heat ex-changer conducts heat derived from the loop to the refrigerant
in the above-ground unit – which again controls the temperature of your
home. In fact, the closed loop systems can be installed in different
configurations like vertical, horizontal, in pond or lake.
2. Open Loop Systems –
Open
loop systems use surface body or well water to control temperature
instead of antifreeze. Then, the water is circulated throughout the
system; and run through a heat exchanger like the same way in a closed
loop system. After that, it is discharged in a different well.
3. Hybrid Systems –
Hybrid
systems utilize a combination of geothermal resources available. Though
these systems vary from one installation to other, there is no
standardized description.
These
are all about three types of geothermal systems available for use. Now
take a look at how geothermal pumps work well in winter:
How geothermal systems work in winter?
A
geothermal heat pump draws heat from the outside, like the same way as a
standard heat pump. The key difference is where exactly the outside of
the house the pumps pull the heat.
A
geothermal system uses underground loop filled with a solution of water
and antifreeze to draw heat – again passes through a heat exchanger to
send the heat to the refrigerant and circulates throughout the indoor
parts.
Generally,
the loops are located deep enough so that the frost on the ground in
winter doesn’t reach there. Nevertheless the amount of cold on the
ground during the winter, the pump maintains an almost constant
temperature between 45°F and 50°F. This is only possible for the heat
radiation from the earth’s core.
The
resultant amount is more than enough to allow the geothermal heat pump
work without additional hassle. In summer, it’s cool enough to ensure
the easy deposition of heat energy when the geothermal systems are in
cooling mode. This way, you can enjoy efficient home comfort year round.
To know more about geothermal systems, please visit our website.
Comments
Post a Comment